Teletek SensoIRIS GAS Adresli Gaz Dedektörü

Teletek SensoIRIS GAS, adresli gaz dedektörüdür.

SensoIRIS GAS is an addressable gas detector for LPG and methane (CH4) leaks. It is designed for connection to compatible Teletek fire alarm panels that support the TTE communication protocol.

When the concentration of flammable gas exceeds the alarm threshold, the detector activates its red LED and built-in buzzer and sends an alarm signal to the connected panel. The installation position must be selected according to the gas being monitored.

An automatic diagnostic function continuously monitors the sensor and electronics. If a fault is detected, the yellow LED lights, the green LED flashes and an audible signal is activated.

A short press of the button activates a five-minute silencing mode, temporarily disabling the buzzer and panel activation. Holding the button for more than five seconds starts the test mode, which checks the LEDs, buzzer and communication with the panel.

Why Choose SensoIRIS GAS?

Addressable Identification
Gas alarms and detector status are communicated to the connected fire alarm panel.

Local Warning
The built-in indicators and buzzer provide an immediate warning in the protected area.

Automatic Diagnostics
The detector continuously monitors its sensor and electronics for faults.

At a Glance

• Detects LPG and methane (CH4)
• Addressable wired connection
• Compatible with panels supporting TTE protocol
• Alarm transmitted to the fire alarm panel
• Built-in red alarm indicator and buzzer
• Automatic sensor and electronics monitoring
• Visual and audible fault indication
• Five-minute silencing mode
• Built-in test mode

Looking for a standalone version? Check out the SensoGAS NG/LPG.

Nerelerde kullanılır?

Mutfak, kazan dairesi ve otoparklarda yanıcı veya zehirli gaz kaçağını erken algılayarak alarm verir ve gerekirse gaz vanasını kapatır.

Kurulum ve uyumluluk

Yangın algılama sistemleri; Binaların Yangından Korunması Hakkında Yönetmelik ve TS EN 54 standardına uygun olarak projelendirilmeli ve yetkili ekiplerce devreye alınmalıdır.

Tüm özellikler

• Detects LPG and methane (CH4)
• Addressable wired connection
• Compatible with panels supporting TTE protocol
• Alarm transmitted to the fire alarm panel
• Built-in red alarm indicator and buzzer
• Automatic sensor and electronics monitoring
• Visual and audible fault indication
• Five-minute silencing mode
• Built-in test mode