Eaton MDP201 Kanal Tipi Dedektör Probu

Eaton MDP201, Duct mounting probe ailesine ait kanal tipi dedektör probu modelidir.

Eaton Duct mounting probe, No Detector & Base, Plastic, compatible with Eaton addessable detectors and base

The air duct mounting probe unit enables Eaton's range of addressable, conventional and two-wire fire alarm system smoke detectors to be installed in heat, air conditioning and ventilation (HVAC) ducts. Presence of smoke in the HVAC ducts is detected by sampling the airflow through the duct via two sampling tables. Inside the probe, a detector and base are mounted within a sampling chamber.

Essential for detecting smoke early and preventing circulation

Eaton's air duct mounting probe uses 2 sampling tubes to detect the presence of smoke in a ventilation duct. This early detection helps to prevent smoke from a fire circulating through vents and spreading to other areas otherwise unaffected. Paired with Eaton's conventional or addressable detectors, alarm mode will be activated to clearly indicate the presence of smoke.

Test and go

The detector and base of the duct mounting are both mounted within a sampling chamber. To make testing simpler, the unit features a small hole with a plug on the exhaust side avoiding the need to remove the lid. Enabling the use of smoke to check that the detector is working reliably.

Nerelerde kullanılır?

Konut, ofis, otel ve endüstriyel alanlarda yangının ilk belirtilerini algılamak için tavana monte edilir.

Kurulum ve uyumluluk

Yangın algılama sistemleri; Binaların Yangından Korunması Hakkında Yönetmelik ve TS EN 54 standardına uygun olarak projelendirilmeli ve yetkili ekiplerce devreye alınmalıdır.